Kokopelli Design

Native American Beadwork, Schmuck, Lederarbeiten und allerlei Kreativitätsausbrüche

Artfire Shop: Unlimited Listings!

Von Kokopelli am 6. Oktober 2009. Abgelegt in Events, Geschenke, Schmuck

Hallo zusammen!

Schaut doch mal in meinem Artfire Shop Kokopelli Design vorbei! Für kurze Zeit hat Artfire die Begrenzung für die Anzahl der gelisteten Artikel aufgehoben und es gibt nun in meinem Shop täglich neue Schmuckstücke zu bewundern. Und nicht nur zehn Stück, sondern viiiiiiiiieeeeeel mehr! Also schaut vorbei und denkt schon ans Shoppen für Weihnachten!

Hi everyone!

Come over and have a look at my Artfire Shop Kokopelli Design! For a short time span Artfire cancelled the limited listing, even for Basic Accounts and there are now new jewelry pieces in my shop daily. And not only ten, but many, many, many more! So come over and already think about your Christmas shopping!

Chainmaille: Romanov-Armband/Bracelet

Von Kokopelli am 16. September 2009. Abgelegt in Chain Maille, Events, Handwerk/Volkskunst, Kupfer/Copper, Schmuck, Swap, Wirework

Romanov-Armband

OK, noch mehr Chainmaille, diesmal mit einer Byzantine-Variation genannt Romanov. Dafür macht man einzelne Byzantine-Elemente und verbindet sie mit größeren Ringen zu einer Kette. In die Mitte der einzelnen Elemente kann man noch Perlen einsetzen. Mein Romanov-Armband ist aus 1mm/18 gauge-Kupfedraht gemacht und der AR für die Byzantine-Elemente ist 3,5. Der Verschluß ist ebenfalls von mir mit dem gleichen Draht hergestellt. Die Perlen sind kobaltblaue tschechische Glasschliffperlen und ca. 6 mm groß.

OK, more chainmaille, this time with a variation of Byzantine called Romanov. For this variation you make single byzantine elements and assemble them with bigger jump rings to get a chain. In addition one can add beads in the middle of the single elements. My Romanov bracelet is made from 18-gauge copper wire and the AR for the Byzantine elements is 3,5. The clasp is handmade by me from the same copper wire than the bracelet. The beads are 6 mm cobalt blue Czech cut beads.

(designed by Kokopelli, 2009)

Chainmaille: Byzantine-Armband/Bracelet

Von Kokopelli am 31. August 2009. Abgelegt in Chain Maille, Handwerk/Volkskunst, Kupfer/Copper, Schmuck, Swap, Wirework

Byzantine-Armband

Während ich über ein paar Designs für den Oktober-Armband-Swap nachgedacht habe, sind mir wieder mal meine Ringe für Chainmaille in die Hände gefallen und ich habe mal kurz, so quasi im Vorbeigehen, dieses Armband gekettelt.  Das Problem ist, daß ich dieses Mal meine ,,Zielperson” im Swap nicht wirklich gut kenne und deswegen auch nicht weiß, was ihr gefällt. Aber dieses Armband erschien mir definitiv zu wuchtig. Und deshalb seht ihr es nun schon hier. Gemacht mit 1mm/18-gauge Kupferdraht mit einem Innendurchmesser von 3,5 mm, folglich auch einer AR von 3,5.  Die Perlen sind tschechische Glasschliffperlen von Hudson’s Bay und die Schließe habe ich selbst aus 1mm-Kupferdraht gefertigt. Ich denke, ich werde das Armband in meinem Artfire-Shop stellen.

While thinking about some designs for the October Bracelet Swap, I ran across my jump rings for chainmaille and so I made this bracelet. The problem with the current bracelet swap is that I don’t really “know” my mark this time and I don’t know what she likes. But this bracelet definitely seemed too bulky to me and so you can see it here already. Made from 18-gauge copper wire with an ID of 3,5 mm, which makes an AR of 3,5. The beads are Czech cut beads from Hudson’s Bay and the clasp is handmade by me from 18-gauge copper wire. I think I’ll put this in my Artfire shop.

(designed by Kokopelli, 2009)

Secret Santa’s Ear (oder einfach nur ein Ohrring Swap)

Von Kokopelli am 25. Mai 2009. Abgelegt in Chain Maille, Handwerk/Volkskunst, Schmuck, Swap, Wirework

 

Die Beadingdaily-Crew hat wieder einmal zugeschlagen und Inca organisiert für uns alle nun einen monatlichen Ohrring-Swap. Jeder Teilnehmer bekommt per Mail einen Namen, darf aber nicht verraten welchen und muß dann für sein ,,Opfer” ein Paar Ohrringe entwerfen. Ein paar Anhaltspunkte konnte man auf der jeweiligen Profilseite seines Swap-Partners nachlesen, aber der Rest war einzig und allein dem Können, der Kreativität und den Vorlieben des Designers überlassen. 

The Beadingdaily crew stroke again and Inca organizes now a monthly earring swap. Every participant gets a name and then has to make a pair of earrings for his “target”. Along with the name you get some specification on the BD profile site of your person, but the rest is up to the skills, the creativity and the preferences of the designer.

Byzantine Ohrringe mit blauen Cateyes

Mein erstes Paar Ohrringe durfte ich für Sheila machen. Ich habe aus Kupferringen Byzantine-Elemente gemacht und mit blauen Cateyes verziert. Die Ohrhaken habe ich aus demselben Kupferdraht geformt, schön gehämmert und glattgefeilt, damit keine scharfen Kanten zurückbleiben.

I designed my first pair of earrings for Sheila. I made a copper byzantine element and added some blue cateye beads. I also made the earwires from the same copper wire as the jump rings, hammered and filed them to avoid any sharp edges. 

Blue Swarovski Earrings by Donna

Ich habe meine ersten Ohrringe von Donna bekommen und sie sind den ganzen langen Weg von der NW-Pazifikküste der USA hierher gereist. Ich liebe die Ohrringe! Genau meine Farben! Ein Mix blauer und grüner (Caribean Opal, Crystal AB, Erenite und Aquamarine) Swarovski-Kristalle und Sterlingsilber. Und schon alleine das Auspacken war wie Weihnachten. Vielen Dank, Donna! :-)

 My first pair of earrings came from Donna and came all the way from the US Northwest coast. I love these earrings! Exactly my colors! A mix of blue and green (caribean opal, crystal AB, erenite and aquamarine) Swarovski crystals and sterling silver. And even opening the package was like Christmas. Thank you so much, Donna! :-)

Byzantine-Rosenkranz-Armband/Byzantine Rosary Style Bracelet

Von Kokopelli am 16. April 2009. Abgelegt in Chain Maille, Wirework

Byzantine Bracelet

Jules, ein bißchen Inspiration für dich! Vor kurzem habe ich mir das Buch ,,Handcrafting Chain and Bead Jewelry” von Scott David Plumlee gekauft und es war wirklich jeden Cent wert. Da es sehr wenig deutsche Literatur über Chainmaille gibt, habe ich mir das meiste selbst beigebracht, aber irgendwie kam ich nicht mehr weiter und es hat auch nicht mehr wirklich Spaß gemacht. Dieses Buch hat meine Kettenkünste nun auf eine neue Stufe gehoben und einige Dinge sind nicht mehr ganz so mühsam. Als erstes habe ich das ,,Rosary Design” aus dem Buch ausprobiert, das eine Variation der Byzantine Chain ist (oder eine Byzantine Chain mit ,,perligen” Unterbrechungen). Meine Variante besteht aus 0,8 mm-Messingdraht und hellgrünen 4 mm Katzenaugen-Perlen. Die Schließe ist ebenfalls handgemacht nach einer Anleitung aus Scotts Buch, aber aus 1mm-Messingdraht, um ihr mehr Stabilität zu verleihen.

Dieses Schmuckstück steht in meinem Artfire Shop zum Verkauf.

Jules, some inspiration for you! Recently I bought the book “Handcrafting Chain and Bead Jewelry” by Scott David Plumlee and it was worth every cent. As there is very little German literature about chain maille, I am mostly self-taught, but somehow I just can’t get any further and I didn’t have much fun. But this book took my chain making skills to a new level and some things are not that exhausting anymore. Firts I tried the “Rosary Design” from the book, which is a variation of the byzantine chain (or a byzantine chain with “beady” interruptions). My variation is made from 20 gauge brass wire and light green 4mm cateye beads. The clasp is also handmade following instructions in Scott’s book, but from 18 gauge wire to give it additional strength.

For this and other designs, check my Artfire Shop. Thank you!

Kreativ Blogger Award

Von Kokopelli am 5. April 2009. Abgelegt in Awards

Kreativ Blogger

Ich weiß nicht mehr genau, wie ich auf Jules’ Blog gekommen bin, aber ich bin irgendwie bin ich bei meinen Internetreisen (Blogs lesen macht süchtig!) drüber gestolpert. Glücklicherweise! Ich habe eine Freundin gefunden, die nicht nur sehr talentiert in der Schmuckherstellung ist, sondern auch eine sehr fleißige Bloggerin, die ihre Schmuckdesigns, ihre Häkelprojekte, Geschichten über ihre Familie und andere Dinge online mit anderen teilt. Ihre neueste Leidenschaft ist Schmuck mit Ketten, also besucht ihren Blog, um all ihre tollen Designs zu bewundern. Fantastisch! Und nun hat sie mir diesen Award verliehen. Vielen, vielen Dank, Jules!

So, und nun zur Liste der 7 ungewöhnlichen Dinge, die ich liebe:

1. schlechte Actionfilme

2. Gewitter

3. Laugenweckle mit Gsälz (für Nicht-Schwaben: Laugenbrötchen mit Konfitüre ;-) )

4. bei Wind, Regen oder Schnee mit dem Auto fahren (am liebsten bei Schnee)

5. zu ungewöhnlichen Zeiten wach sein

6. Tuareg-Tee: Pfefferminztee mit soviel Zucker, daß der Löffel drin steht

7. Segeln, obwohl ich dabei meistens seekrank werde

I don’t know how I came to Jules’ blog, but somehow I stumbled upon it during one of my internet journeys (blog reading can be so addictive!). And that was a luck! I found a friend who is not only very talented in jewelry making but also a busy blogger sharing her jewelry designs, crochet projects, stories about her family and her home and other things online. Her latest addiction is chain, so check out her blog to see all the designs she comes up with. Fantastic! Thank you so much, Jules! I really appreciate that!

And now I’m supposed to list 7 unusual things that I love:

1. bad action movies

2. thunderstorms

3. lye rolls with jam

4. driving my car in wind, rain or snow (snow’s my favorite here)

5. being awake at unusual times

6. Touareg Tea: peppermint tea with very, very much sugar

7. sailing, although I get seasick most of the times

And I pass this award on to Anne from Al’s Creations. Check out her blog! Chain maille and wirework at its finest!

Half Persian

Von Kokopelli am 19. Februar 2009. Abgelegt in Chain Maille, Schmuck, Wirework

Half Persian Armband mit Türkis-Perle

So, das nächste Abenteuer in der Chain-Maille-Technik ist überstanden! Wenn ihr gute Nerven habt (und ich meine wirklich, wirklich gute Nerven!), dann versucht mal Half Persian. Die Technik an sich ist nicht schwer, aber der Anfang……ich war kurz davor, das Handtuch zu werfen und mir was anderes vorzunehmen. Wenn man vier Hände hat (was eher selten ist ;-) ), dann ist der Anfang auch gut zu bewältigen. Ich habe irgendwo gelesen, daß es Leute gibt, die immer ein Stück der fertigen Kette behalten, um nie wieder den Anfang machen zu müssen. Vielleicht sollte ich das auch machen. Naja, mit genug Zeit, einer Styroporplatte, etlichen Stecknadeln, zwei Zangen und viel Geduld habe ich es dann doch geschafft. Und hier ist nun das fertige Schmuckstück: ein Armband aus versilberten Ringen (1,0 mm Draht, 4 mm ID, AR: 4) mit einer handgemachten S-Schließe, in die ich eine Türkisperle eingearbeitet habe. Dieses Schmuckstück könnt ihr in meinem Artfire-Shop kaufen. Danke fürs Schauen!

Oh boy, my next chain maille adventure is over! If you have strong nerves (and I mean really, really strong nerves!), you should try half persian. Weaving the chain is not really difficult, but the beginning…..I was short before throwing in the towel and try something else. If you have four hands (what is very seldom ;-) ), then you can do the beginning really easy. I read somewhere, that there are people, who always keep a piece of the chain to avoid doing the beginning of half persian again. Maybe I should do this, too. Well, with enough time, a styrofoam board, some pins, two pairs of pliers and much patience, I managed the beginning of the chain. And here is the finished piece: a bracelet made of silverplated jump rings (18-gauge wire, 4 mm ID, AR: 4) with a handmade s-clasp featuring a turquoise bead. This bracelet is for sale in my Artfire-Shop.  Thanks for looking!

Box Chain….Inca Puno….Queen’s Braid….

Von Kokopelli am 16. Februar 2009. Abgelegt in Chain Maille, Schmuck, Wirework

Box Chain Armband mit Karneolperle

Dieses Chain-Maille-Muster ist, wie fast alle anderen auch, unter verschiedenen Namen bekannt. Da das Muster ähnlich wie Byzantine aufgebaut ist, habe ich es für mein zweites Chain-Maille-Schmuckstück ausgewählt. Das Armband ist wieder aus Kupferringen gemacht (0,8 mm, 3,5 mm ID, AR 4,4) und mit einer schönen gebänderten Karneoperle verziert. Den Abschluß bildet eine handgemachte Schließe, ebenfalls aus Kupferdraht. Eine tolle Anleitung für die Box Chain (nebst anderen) findet sich bei Davidchain Jewelry (Danke, Scott, für die tolle Seite! Und Ski Heil!). Allen, die sich für Chain Maille interessieren, sei die Maille Artisans Homepage empfohlen. Viele Infos!

This chain maille weave is, like many others, known by several names. And because the pattern is built very similar to byzantine, I chose it for my second chain maille project. The bracelet is again made from copper rings (gauge 20, 3,5 mm ID, AR 4,4) and features a beautiful banded carnelain bead. I finished it with a handmade hook-and-eye-clasp, also made from copper wire. A great tutorial for box chain is offered on Davidchain Jewelry (Thanks, Scott, for the helpful site! And happy snowboarding!). To all, who are interested in chain maille, I recommend the Maille Artisans Homepage. Much information!

Byzantine Chain Armband/Bracelet

Von Kokopelli am 7. Februar 2009. Abgelegt in Chain Maille, Schmuck, Wirework

Byzantine Chain Armband

Dieses Armband war ein erster Versuch von Chain Maille meinerseits. Und von dem Ergebnis bin ich recht begeistert. Nach einem Fehlstart mit zu dünnem Draht und längerer ,,Werkeldauer” habe ich es gestern endlich fertig bekommen. Verwendet habe ich 1 mm-Kupferdraht und eine 3,5 mm-Stricknadel (AR 3,5), um die ich den Draht für die Ringe gewickelt habe. Die Schließe ist ebenfalls aus 1 mm-Draht gemacht. Auf Bevs Blog (Danke für die Hilfe, Bev!) gibt es jede Menge Varianten der Byzantine Chain zu sehen und ich denke, ich werde noch einiges ausprobieren. Das Armband paßt übrigens hervorragend zu meinem Seaglass-Anhänger. Fehlen nur noch ein paar Ohrringe….vielleicht ein paar Möbius-Rosen?

This bracelet is my first attempt in making chain maille. And I’m really delighted by the outcome. After a false start with the wrong wire gauge and a slightly longer working time than planned I finished it yesterday. I worked with 18-gauge copper wire and a 3,5 mm knitting needle as mandrel for the rings (AR 3.5). For the closure I also used 18-gauge copper wire. On Bev’s Blog (Thanks for the help, Bev!) you can see many variations of byzantine chain and I think, that I’ll try some of these, too. BTW, the bracelet goes perfect with one of my wirewrapped sea glass pendants. I just have to make matching earrings….maybe some moebius roses?